User`s guide

Configure>Users and Groups Screens [OSD]
450
AlterPath OnSite Administrator’s and User’s Guide
9. Select “grant” or “deny” as desired.
10. Select “Apply” to save the changes.
The “Port permissions” screen appears.
11. Select “Exit.”
T To Specify an Authentication Method for
Serial Ports
[OSD]
This procedure assumes you have already configured a server for the
authentication method you assign in this screen. See “To Configure an
Authentication Type for Direct KVM Port Access” on page 392
1. Select a serial port or all serial ports.
See “To Select a Serial Port or Ports to be Configured [OSD]” on page
446, if needed.
2. Choose “Authentication” from the “Serial ports” menu.
The “Authentication” menu appears.
3. Select the desired authentication method for a selected serial port or all
ports.
See “OnSite Authentication Options” on page 7 for an overview of
authentication on the OnSite. See Table 7-29 on page 492 for links to
procedures for setting up authentication servers for each type of method.
Configure>Users and Groups Screens [OSD]
An administrative user can choose the “Users and groups” option from the
OSD Configuration menu to configure users, groups, and KVM port
permissions.The following figure displays the Users and Groups screen.