User`s guide

OSD for All User Types 431
Configuring User Station Screens [OSD]
Configuring User Station Screens [OSD]
An administrative user can use the screens under Configure>User station to
configure session parameters for the local user connection.
Figure 7-26:Selecting OSD Configure>Date/time
The following table lists the task available in the User Station screens and
where to find more information.
Task Where Documented
Specify the period of inactivity before the
session is ended. The default is three
minutes.
“To Specify the User Station Idle Timeout”
on page 433.
Specify the period of inactivity before the
screen saver starts. The default is 10
minutes.
“To Specify the User Station Screen Saver
Idle Timeout Period” on page 434
Specify the time each server is viewed
while the user is cycling from one port to
another. The default cycle time is 3 seconds.
See “To Cycle Through All Authorized
KVM Ports” on page 96 for instructions on
how to cycle through the servers.
“To Configure the User Station: Cycle Time
[OSD]” on page 434