User`s guide

Configure>User Station Screens [OSD]
428
AlterPath OnSite Administrator’s and User’s Guide
The following diagram lists the configuration screens accessed through the
Configure>User station option. All the screens that appear after the
“Keyboard type” screen are for optionally redefining the command key
portion of AlterPath Viewer hot keys: “Quit,” “Power Management,” “Mouse/
Keyboard Reset,” “Video Configuration,” “Switch Next,” “Switch Previous,”
and “Port Info.” See “Configuring Keyboard Shortcuts (Hot Keys)” on page
63 for details, if needed.
Figure 7-25:OSD Configure>User Station Screens
See “Configuring User Station Screens [OSD]” on page 431 for more
information.
The following table shows the user station configuration screens.
Table 7-14: User Station Configuration Screens [OSD] (Sheet 1 of 3)
Screen Description
Idle timeout
The period of inactivity before the user is logged out from the
OSD. Default = 3 minutes.
Configure
— User station
— Idle timeout (min)
— Scr. saver time (min)
— Cycle time (sec)
— Keyboard type
— Quit
— Power Management
— Mouse/Keyboard Reset
— Video Configuration
— Switch Next
— Switch Previous
— Port Info