User`s guide

Configuring Static Routes [OSD]
424
AlterPath OnSite Administrators and Users Guide
6. To add a static route to a gateway, do the following:
a. Select “Gateway,” and press Enter.
The “Gateway,” screen appears.
b. Enter the gateway IP address.
The “Metric” screen appears.
c. Skip to Step c.
7. To add a static route to an interface, do the following:
a. Select “Network Device” and press Enter.
The “Device” screen appears.
b. On the “Device” screen, enter the name of the interface and press
Enter.
The Metric screen appears
c. On the Metric screen, enter a metric.
T To Edit a Static Route [OSD]
1. Go to: Configure>Static Routes.
The Static Routes “Action” screen appears.
2. Select Edit.
The “Select a Route” screen appears.
3. Select a route.
The “Host or Net Route” screen appears
4. To add a host route, do the following:
(To add a network route, go to Step 5. To add a default route, go to Step
6.)
a. Select “host” and press Enter.
The “Target” screen appears.
b. On the “Target” screen, enter the host’s IP address.
The “Gateway or Device” screen appears