User`s guide

OSD for All User Types 423
Configuring Static Routes [OSD]
T To Add a Static Route [OSD]
1. Go to Configure>Static Routes.
The Static Routes Action screen appears.
2. Select Add.
The Host or Net Route screen appears
3. To add a host route, do the following:
a. Select “host” and press Enter.
The “Target” screen appears.
b. On the “Target” screen, enter the IP address for the host.
The “Gateway or Device” screen appears
c. If you select “Gateway,” go to Step 6
d. If you select “Network Device,” go to Step 7
4. To add a network static route, on the Host or Net Route screen do the
following:
a. Select “net” and press Enter.
The “Target” screen appears.
b. On the “Target” screen, enter the IP address of the network.
The “Netmask” screen appears.
c. Enter the netmask.
The “Gateway or Device” screen appears
d. If you select “Gateway,” go to Step 6
e. If you select “Network Device,” go to Step 7
5. To add a default static route, do the following:
a. Select “default” and press Enter.
The “Gateway or Device” screen appears
b. If you select “Gateway,” go to Step 6
c. If you select “Network Device,” go to Step 7