User`s guide
Configuring Static Routes [OSD]
422
AlterPath OnSite Administrator’s and User’s Guide
Configuring Static Routes [OSD]
An administrative user can use the Static Routes screen to configure static
routes.
Netmask
Appears only when “net” is selected from the “Host or Net
Route” screen. Netmask for the destination.
Gateway or Device Two options are: “Gateway (gw)” or “Network Device (dev).”
Gateway
Appears only when “Gateway (gw)” is selected from the
“Gateway or Device” menu. Gateway IP address.
Device
Appears only when “Network Device” is selected from the
“Gateway or Device” menu. Interface name (such as eth0).
Metric The number of hops to the destination.
Table 7-13: Static Routes Screens [OSD] (Sheet 2 of 2)
Screen Description