User`s guide

OSD for All User Types 421
Configure>Network>Static Routes Screens [OSD]
Figure 7-23:OSD Configure>Network>Static Routes Screens
The following table shows the static routes screens that appear when one of
the actions (Add, Edit, or Delete) is selected.
Table 7-13: Static Routes Screens [OSD] (Sheet 1 of 2)
Screen Description
Select a route
Appears only when the Edit and Delete options are selected.
Choices include the “default” route entry and any previously-
configured static routes.
Host or Net Route Types of routes: “host,” “net,” or “default.” Note: A default
route is used to direct packets that are addressed to networks not
listed in the routing table.
Target IP address for the target host or network.
Configure
— Network
— Static Routes
— Add | Edit Entry
— Select a route [Edit option only]
— Host or Net Route [Select host | net | default]
— Target [host and net options only]
— Netmask [net option only]
— Gateway or Device
— Gateway (gw)
— Gateway
— Metric
— Network Device (dev)
— Device
— Metric
— Delete Entry
— Select a route