User`s guide

Configure>Network>Static Routes Screens [OSD]
420
AlterPath OnSite Administrator’s and User’s Guide
Configure>Network>Static Routes Screens
[OSD]
An administrative user can select the Static Routes option from the Network
Configuration menu to configure static routes.
If judiciously used, static routes can sometimes reduce routing problems and
routing traffic overhead. If injudiciously used, when a network fails, static
routes can block packets that would otherwise be able to find alternate routes
around the point of failure if dynamic-routing were in effect.
Selecting Static Routes under Configure>Network brings up the Static Routes
Action Menu, as shown in the following screen.
The following diagram lists the configuration screens accessed under
Configure>Network>Static Routes.