User`s guide

OSD for All User Types 413
Configure>Network>IP Filtering Screens [OSD]
Protocol
Choices are “All,” “Numeric,” “TCP,” “UDP,” “ICMP.”
Protocol Number
Appears only if “Numeric” is selected from the “Protocol” menu.
Source Port
Appears only if “TCP” or “UDP are selected from the “Protocol”
menu. The source port number.
Destination Port
Appears only if “TCP” or “UDP are selected from the “Protocol”
menu. The destination port number.
SYN Flag
“SYN” (synchronize), appears only if “TCP” is selected from the
“Protocol” menu. Options are “Any,” “Set,” “Unset.”
RST Flag
“RST” (reset), appears only if “TCP” is selected from the
“Protocol” menu. Options are “Any,” “Set,” “Unset.”
Table 7-10: IP Filtering Configuration Screens [OSD] (Sheet 4 of 6)
Screen Description