User`s guide

OSD for All User Types 399
Configure>Network>Network Screens [OSD]
T To Configure Basic Networking [OSD]
1. From the OSD Main Menu, go to Configure>Network.
The Network Menu appears.
2. From the Network Menu, select Network again.
The DHCP screen appears.
3. To enable DHCP, do the following steps.
a. Select the “enabled” option.
b. Press Enter.
The next DHCP screen appears.
c. Select “enable” or “enable and save.”
4. To enter network parameters manually, do the following steps.
a. Select the “disabled” option.
DNS Server
The IP address for the DNS server.
Domain
The domain name.
Hostname
The hostname for the OnSite.
Table 7-7: Network Configuration Screens [OSD] (Sheet 2 of 2)
Screen Description