User`s guide

OSD for All User Types 395
Configure>Network Menu Options [OSD]
Note: Do not use reserved port numbers 1 through 1024.
T To Assign Alternate TCP Port Numbers for
the AlterPath Viewer
[OSD]
1. Go to: Configure>General>Authentication Type>Syslog Facility> Escape
Sequence>Sun Keyboard>IP Security Level >3DES>Direct Access>TCP
Viewer Port.
The “TCP Port” screen appears.
2. Type in the desired TCP Port for the AlterPath Viewer to use, making use
of the following conventions:
Use the plus sign (+) after a TCP port number to increment the
port number by 1 for each additional AlterPath Viewer that is
launched. For example: 5903+ means that the first AlterPath
Viewer uses port 5903 and the second uses port 5904.
Use the hyphen (-) to indicate a range of addresses. For exam-
ple, 5903-5907.
Use the comma (,) to separate two TCP port addresses. For
example, 5901,5903.
Combine commas and hyphens, as necessary For example,
1901,5903-5905,5907
3. Select Save to complete the General Configuration.
Configure>Network Menu Options [OSD]
An administrative user can select the Network option on the Configuration
Menu to configure network-related services for the OnSite.
Figure 7-11:Selecting OSD Configure>Network