User`s guide

Configure>General: Syslog Facility Screen
392
AlterPath OnSite Administrator’s and User’s Guide
configured for the selected type of method. See “OnSite Authentication
Options” on page 7 for an overview of authentication on the OnSite, if
needed.
T To Configure an Authentication Type for
Direct KVM Port Access
1. Go to: Configure>General>Authentication Type.
The Authentication type screen appears.
2. On the Authentication Type screen, select an authentication type.
See “OnSite Authentication Options” on page 7 for background
information on choosing the appropriate authentication method.
3. Save the changes.
Configure>General: Syslog Facility Screen
The facility number entered on this screen is used by the administrator of the
syslog server to identify messages generated by devices connected to the
KVM ports. “Syslog Servers” on page 28 gives examples of using facility
numbers.
T To Configure a Syslog Facility Number [OSD]
Obtain the facility number to use for the OnSite from the system administrator
of the syslog server.
1. Go to: Configure>General>Authentication Type>Syslog Facility.
The “Syslog Facility” screen appears.
2. Enter the value (0 through 7) that the administrator of the syslog server
has assigned.
3. Save the changes.
Configure>General: Escape Sequence Screen
By default, the AlterPath Viewer escape sequence (the first portion of all
AlterPath Viewer hot keys) is Ctrl+k. On the Escape Sequence screen, you