User`s guide
Understanding OSD Configure Screen Series
388
AlterPath OnSite Administrator’s and User’s Guide
Understanding OSD Configure Screen Series
Selecting an option from the “Configure” menu usually brings up to a series
of related screens, which the administrative user navigates through one at a
time until the final screen is reached.
For example, if Date/Time is selected, a series of “Date/time Config.” screens
appears starting with “NTP” and ending with “Time,” as shown in the
following figure.
Figure 7-9: Example Screens in Configure Screen Series
As illustrated, all configuration screens except the final one have a right arrow
at the bottom right that an administrative user can click to go to the next
screen. Clicking “Save” on any of the screens saves any changes made to that
point. An administrative user can also wait for the final screen in a series
before saving changes. Clicking “Save” on the final screen saves any change
and returns to the Configuration menu.
Save/Load
Config
Permanently save configuration changes,
load stored a configuration or restore the
configuration to factory default values.
“Configure>Date/Time
[OSD]” on page 480
Exit
Exit from the menu. N/A
Table 7-5: OSD Configuration Menu Options (Sheet 3 of 3)
Menu Selection Purpose Where Documented
Next button
First screen Final screen
Final Save button