User`s guide

OSD for All User Types 387
Configure Menu Overview [OSD]
Date/Time
Enable/disable NTP or manually
configure the system date and time.
“Configure>Network>
Date/time Screens
[OSD]” on page 426
User station
Configure the Local User station’s idle
timeout, screen saver time, cycle time,
keyboard type, and the various escape
sequences for the current workstation.
“Configure>User
Station Screens [OSD]”
on page 427
KVM ports
Activate KVM ports, assign aliases, and
enable power management.
“Configure>KVM Ports
Screens [OSD]” on page
436
Serial ports
Activate serial ports, assign aliases,
enable power management, set the baud
rate, access permissions, and an
authentication method for one or more
ports.
“Configure>Serial Ports
Screens [OSD]” on page
440
Users and
groups
Configure users and groups, user
passwords, and KVM port access
permissions.
“Configure>Users and
Groups Screens [OSD]”
on page 450
Syslog
Configure the IP address of the syslog
server. Note: syslogging also requires
assignment of a facility number using the
General option, described earlier in this
table.
“Configure>Syslog
Screens [OSD]” on page
466
PCMCIA
Configure PCMCIA cards. “Configure>PCMCIA
Screens [OSD]” on page
466
Authentication
Configure an authentication method for
OnSite logins and authentication servers
for OnSite, KVM, and serial port logins.
“Configure>Authenticat
ion Screens [OSD]” on
page 470
Table 7-5: OSD Configuration Menu Options (Sheet 2 of 3)
Menu Selection Purpose Where Documented