User`s guide

Configure Menu Overview [OSD]
386
AlterPath OnSite Administrator’s and User’s Guide
4. Select On, Off, Lock, Unlock, or Cycle as appropriate.
5. To change the status of other outlets, repeat steps 2 and 3.
6. Hit Esc until you get to the next menu you want to access.
Configure Menu Overview [OSD]
An administrative user can select “Configure” from the OSD Main Menu
brings up the Configuration Menu. The Configuration Menu provides a
number of options, as shown in the following screen.
Figure 7-8: Configure Menu Options
Not all the configuration menu options are visible in Figure 7-8. Table 7-5
gives a brief description of all the OSD configuration menu options and
provides links to where the features are documented.
Table 7-5: OSD Configuration Menu Options (Sheet 1 of 3)
Menu Selection Purpose Where Documented
General
Configure authentication type for direct
logins to KVM ports; syslog facility
number; KVM connection hot key escape
sequence, and Sun Keyboard emulation
hot key escape sequence. Note:
syslogging also requires configuration of
the syslog server using the Syslog option,
described later in this table.
“Configure>General
Screens [OSD]” on page
389
Network
Configure DHCP or assign an IP address
and configure other basic network
parameters; configure SNMP, VPN, IP
filtering, hosts, and static routes
“Configure>Network>
Network Screens
[OSD]” on page 397