User`s guide

Power Management Menu [OSD]
384
AlterPath OnSite Administrator’s and User’s Guide
Power Management Menu [OSD]
Choosing “Power Management” from the OSD Main menu brings up the
Power Management screen as shown in the following figure.
Figure 7-5: OSD Power Management Screen
The screen displays a list of all outlets on all AlterPath PM IPDUs connected
to the OnSite. See “Power Management” on page 50 for an introduction to
power management on the OnSite, if needed.
The Status column displays whether the outlet is on (ON), off (OFF), locked
(L), or unlocked (U).
Note: To quit the power management menu or any of the related screens,
press Esc.
When the administrative user select an outlet, the “Outlet Status” screen
appears as shown in the following figures. The “Status” box in the middle of
the screen displays the current status for the selected outlet and buttons appear
on the bottom of the screen to allow you to change the outlet’s status.
When an outlet is on and unlocked, “Off,” “Lock,” and “Cycle” buttons
appear, as in the following figure.
Reboot
Reboot the OnSite. “Reboot [OSD]” on page 499
Table 7-4: OSD Main Menu Options
Menu Selection Purpose Where Documented