User`s guide

Power Management Through the OSD
382
AlterPath OnSite Administrators and Users Guide
Common OSD Navigation Actions
The “Action” column in Table 7-3 shows wording used to refer to common
actions performed while working in the OSD. The “OSD Equivalent” column
describes the keys to use in the OSD screens to perform the actions.
Power Management Through the OSD
See “Power Management” on page 50 for an overview of how power is
managed on the OnSite, if needed.
The following two types of power management can be done through the OSD.
IPDU power management
Power management of servers while connected to KVM ports
IPDU Power Management (OSD)
Only administrative users can use the OSD to perform power management of
outlets on connected and configured AlterPath PMs. See “Power Management
Menu [OSD]” on page 384 and other sections referenced there for the Power
Management screens available to administrative users and for how to use
them.
Table 7-3: Performing Common OSD Navigation Actions
Action OSD Equivalent
Select button_name
Tab or use one of the arrow keys to get to the
button and press “Enter.”
Save changes
Tab or use one of the arrow keys to get to the Save
button and press “Enter.”
Select an option
Tab or use one of the arrow keys to get to the
option and press “Enter.”
Go to a specific screen, as in: “Go
to Configure>Users and Groups.”
Select the first option from the Main menu. On the
next screen that comes up select the next option
from that menu. Do this until you get to the last
option in the menu path.