User`s guide

Web Manager for OnSite Administrators 371
Management>Microcode Upgrade
The actual pathname components must be entered in the “Directory” and “File
Name” fields. If needed, go to the following procedure to find the exact name:
• “To Find the Cyclades Pathname for Software or Microcode
Upgrades [Expert]” on page 368
The following table defines the information to enter on the screen.
KVM Switch (internal) KVMswitch_vNNN.bin PS2 translation controller for the
KVM over IP module (also called
the IP module) and for Local User
connections
KVM Video
Compression Modules
N.N.N.N-YY.MM.DD.N.bin IP module
Table 6-35: Microcode Upgrade Field Names and Definitions
Field Name Definition
Target
The name of the component whose microcode you wish to upgrade (from
Table 6-34 on page 370).
FTP Server
The address of the FTP server where the microcode is located. Any ftp
server where the firmware is previously downloaded can be specified. The
Cyclades ftp site address is: ftp.cyclades.com.
Username
Username recognized by the ftp server. The Cyclades ftp username for
microcode downloads is “anonymous.”
Password
Password associated with the Username. An empty password is accepted
for anonymous login at the Cyclades ftp server
Directory
The pathname where the microcode resides on the ftp server. On the
Cyclades ftp server, the directory is under /pub/cyclades/
alterpath/onsite/released/version_number/filename.
Go to ftp://ftp.cyclades.com/pub/cyclades/
alterpath/onsite/released in a browser, if needed, to verify the
correct pathname and file names for the microcode for the OnSite.
Table 6-34: Microcode Filename Formats, Terminology, and Component (Continued)
Target Name on
Screen
Filename Format Component