User`s guide

Management>Microcode Upgrade
370
AlterPath OnSite Administrator’s and User’s Guide
8. Click “cancel changes” (to restore the backed up configuration files).
Management>Microcode Upgrade
Selecting Management>Microcode Upgrade in Expert mode brings up the
screen shown in the following figure.
Figure 6-126:Web Manager Management>Microcode Upgrade Screen
As shown in Figure 6-126, if the KVM Terminator radio button is selected, a
list of KVM ports appears.
An administrative user can use the Microcode Upgrade screen to specify
information used to automatically download microcode from an FTP server
and install the microcode on various OnSite components. Either the Cyclades
ftp server, ftp://ftp.cyclades.com, or a local ftp server where an
administrator has previously downloaded the microcode can be used.
Note: Upgrade is not complete until the microcode is reset as described
under “To Reset the Microcode After Upgrade [Expert]” on page 373.
The following table shows the terms used on the screen, the corresponding
component names, and the filename formats uses for each type of microcode.
Table 6-34: Microcode Filename Formats, Terminology, and Component
Target Name on
Screen
Filename Format Component
KVM Terminator KVMterm_vNNN.bin All KVM Terminator models