User`s guide

Management>Firmware Upgrade
368
AlterPath OnSite Administrator’s and User’s Guide
T To Find the Cyclades Pathname for Software
or Microcode Upgrades
[Expert]
Perform this procedure to do the following:
• Find the correct filename for the latest release of the OnSite’s operating
system kernel, applications, and configuration files, which are
collectively referred to as “firmware” in the Cyclades management
interfaces.
• Find the correct filename for “microcode” used for other components
either used with or within the OnSite, such as the KVM terminators, IP
modules, and controllers for IP modules.
1. To find the correct filename for the software or component microcode
updates at Cyclades, Corp., enter the following address in a browser:
2. In the released directory, go to the directory with the latest version
number by clicking on the name of the directory.
For example, if the released directory contains directories named
V_1.0.0 and V_1.1.0, you would click the V_1.1.0 directory’s
name. In the version directory, you would see several files like those
shown in the following figure.
3. If upgrading the OnSite kernel, applications, and configuration files, take
a note of the filename of the file whose name starts with zImage and has
the .bin suffix and go to “To Upgrade the OnSite’s Software [Expert]”
on page 369.
4. If upgrading the microcode on a KVM terminator, take a note of the
filename that starts with KVMterm and has the .bin suffix and go to “To
Download Microcode From an FTP Server [Expert]” on page 372.
ftp://ftp.cyclades.com/pub/cyclades/alterpath/onsite/released
1.0.6.0-05.09.01.6bin
KVMswitch_v110.bin
KVMterm_v112.bin
zImage_ons_110.bin
zImage_ons_110.md5