User`s guide

Web Manager for OnSite Administrators 365
Management>Backup Configuration
The “Save” and “Load” buttons appear when either the “FTP” and the
“Storage Device” menu options are selected. The “Save” button saves the
configuration, and the “Load” restores a previously-saved copy of the
configuration files from the selected device.
The previous figure shows the fields that appear when “FTP” is selected from
the “Type” pull-down menu. The following table describes the information to
enter when FTP is selected.
When “Storage Device” is selected from the “Type” pull-down menu on the
Backup Configuration” screen under “Management” in Expert mode, the
“Save” and “Load” buttons appear as shown in the following figure.
Figure 6-124:Backup Configuration Screen—Storage Device
Table 6-32: Fields on the “Backup Configuration” Screen When FTP is Selected
Field Definition
Server IP IP address of an FTP server on the same subnet as the OnSite. (Verify
accessibility by pinging the FTP server.)
Path and
Filename
Path of a directory on the FTP server where you have write access for
saving the backup copy of the configuration file. Specify a filename if
you want to save the file under another name. For example, to save the
configuration file in a file whose name identifies its origin and date
(such as OnSite8802config040406) in a directory called
“/upload” on the FTP server, the following could be entered in the
“Path and Filename” field: /upload/OnSite8802config040406.
Username and
Password
Obtain the username and password to use from the FTP server’s
administrator.