User`s guide

Web Manager for OnSite Administrators 351
Configuration>System>Boot Configuration
3. To configure time and date manually, do the following steps.
a. Select “Disable” from the Network Time Protocol menu.
The “Date” and “Time” fields appear.
b. Enter the month, day, and year under the “Date” header.
c. Enter the hour, minute, and second under the “Time” header.
4. Click “apply changes.”
Configuration>System>Boot Configuration
Selecting Configuration>System>Boot Configuration in Expert mode brings
up a screen like the one shown in the following figure.
Figure 6-115:Web Manager Configuration>System>Boot Configuration
Screen
On the Boot Configuration screen under Configuration>System in Expert
mode, an administrative user can redefine the location from which the OnSite
boots. By default, the OnSite boots from a boot file in the on-board Flash
memory. Booting from the resident software is recommended except when
troubleshooting boot problems. The differences between booting from a local
copy of the software image and booting from the network are explained in the
following sections.
For more details, also see“Boot File Location Information” on page 372.