User`s guide

Configuration>Network>Static Routes
346
AlterPath OnSite Administrator’s and User’s Guide
T To Configure Static Routes [Expert]
See Table 6-30, “Fields and Menus for Configuring Static Routes,” on page
345 if needed.
1. Go to Configuration>Network>Static Routes in Expert Mode.
The Static Routes screen appears.
• To edit a static route, select a route from the “Static Routes” list, and
then select the “Edit” button.
• To add a static route, select the “Add” button from the screen.
The system invokes the New/Modify Route dialog box.
2. Choose “Default,” “Network,” or “Host” from the “Route” pull--down
menu.
3. If you selected “Network, do the following steps.
a. Enter the IP address of the destination network in the “Network IP”
field.
b. Enter the netmask of the destination network in the “Network Mask”
field.
4. If you selected “Host,” type the IP address of the destination host in the
“Host IP” field.
5. Select “Gateway” or “Interface” from the “Go to” pull-down menu and
enter the address of the gateway or the name of the interlace in the
adjacent field.
6. Click “apply changes.”