User`s guide
Configuration>Network>Host Tables
342
AlterPath OnSite Administrator’s and User’s Guide
Configuration>Network>Host Tables
Selecting Configuration>Network>Host Tables in Expert mode brings up the
screen shown in the following figure.
Figure 6-105:Web Manager Configuration>Host Tables Screen
An administrative user can use the screen to add, and edit or delete hosts.
T To Define the OnSite’s IP Address and
Hostname [Expert]
1. Go to Configuration>Network>Host Table in Expert mode.
The Host Table screen appears.
2. To edit a host, select the host IP address from the Host Table and then
click the “Edit” button. (If needed, use the “Up” and “Down” buttons to
navigate through the list.)
3. To add a host, click the “Add” button.
The “host table” dialog box appears.
4. Enter the new or modified host address in the “IP Address field,” and the
host name in the “Name” field, and then click “OK.”
5. To delete a host, select the host you wish to delete and click “Delete.”
6. Click “apply changes.”