User`s guide
Configuration>Network>Firewall Configuration
340
AlterPath OnSite Administrator’s and User’s Guide
Note: Spaces are not allowed in the chain name.
The name of the new chain appears in the list.
4. Finish defining the chain by adding one or more rules, as described in to
“To Add a Rule” on page 245.
T To Edit a Chain [Expert]
Perform this procedure if you want to change the policy for a default chain.
Note: User-defined chains cannot be edited. If you want to rename a chain
you added, delete it and create a new one.
1. Go to Configuration>Network >Firewall Configuration in Expert Mode.
2. Select one of the default chains from Chain list, and then click the “Edit”
button.
If you select a user-defined chain, the dialog box shown in the following
figure appears.
If you select one of the default chains, the “Edit Chain” dialog box
appears.
3. Select the desired policy from the Policy pull-down menu, and then click
OK.
4. Click “apply changes.”
5. To edit any rules for this chain, go to “To Edit a Rule.”