User`s guide

Configuration>Network>Firewall Configuration
330
AlterPath OnSite Administrator’s and User’s Guide
Figure 6-91:Firewall Configuration “Add Chain” Dialog Box
Adding a chain only creates an named entry for the chain. Rules must also be
configured for the chain after it is added to the list of chains.
Firewall Configuration: Editing Rules
If the “Edit Rules” button is pressed under Configuration>Network>Firewall
Configuration in Expert mode, a screen appears with a list of headings like the
one shown in the following figure. (The example shows the OUTPUT chain
selected for editing, which has no rules defined.)
Figure 6-92:Firewall Configuration “Edit Rules for chain_name” Screen
The buttons shown in the following figure appear at the bottom of the screen.
Figure 6-93:Firewall Configuration “Edit Rules for chain_name” Buttons
When the “Add” button is pressed, the “Add Rule” dialog box appears. When
a rule is selected and the “Edit” button is pressed, the “Edit Rule” dialog box
appears. When a rule is selected, pressing the “Up,” and “Down” buttons
moves the rule up and down the list.