User`s guide

Web Manager for OnSite Administrators 327
Configuration>Network>Firewall Configuration
a. Enter the user name in the “User name” field.
b. Enter the password in the “Password” field.
6. For any version of SNMP, do the following steps.
a. Enter the unique object identifier for the object in the “OID” field.
b. Choose “Read Only” or “Read/Write” from the “Permission” field.
7. Click OK.
8. Click “apply changes.
Configuration>Network>Firewall Configuration
Selecting Configuration>Network>Firewall Configuration in Expert mode
brings up the screen shown in the following figure.
Figure 6-86:Web Manager Configuration>Network>
Firewall Configuration Screen
An administrative user can use the Firewall Configuration screen to enable the
OnSite to act like a firewall by filtering packets coming to and leaving the
OnSite, allowing and disallowing packets according to rules you define.
Packet filtering relies on chains and rules being defined. See “Packet Filtering
on the OnSite” on page 65 for details.
Each entry in the list on the Firewall Configuration screen represents a chain
with a set of rules.