User`s guide

Configuration>Network>PCMCIA Management
316
AlterPath OnSite Administrator’s and User’s Guide
T To Configure a Wireless LAN PCMCIA Card
[Expert]
1. Install the wireless LAN card and select “Wireless LAN” from the pull-
down menu on the PCMCIA Management screen.
See “To Begin Configuring a PCMCIA Card [Expert]” on page 306, if
needed.
The “IP Address,” “Network Mask,” “MyPrivateNet (ESSID),” and
Channel fields appear on the Slot dialog box.
2. In the “IP address” field, enter an IP address.
3. In the “Network Mask” field, enter the netmask for the subnet.
4. In the “MyPrivateNet (ESSID)” field, enter the SSID for communicating
with others in your network.
5. In the “Channel” field, enter a channel number.
6. Click the “Enable” checkbox.
7. Click OK.
8. Click “apply changes.”
Configuring a CDMA PCMCIA Card
The administrative user can use the PCMCIA Management screen under
Configure>Network to enable a remote user to dial into the OnSite through an
installed and configured CDMA PCMCIA card. When you select CDMA
from the pull-down menu, the dialog shown in the following figure appears.