User`s guide

Web Manager for OnSite Administrators 315
Configuration>Network>PCMCIA Management
T To Configure a Compact Flash or Hard Disk
PCMCIA Card [Expert]
1. Install the compact flash card or IDE card and select “Compact Flash /
Hard Disk” from the pull-down menu on the PCMCIA Management
screen.
See “To Begin Configuring a PCMCIA Card [Expert]” on page 306, if
needed.
The “Enable” and the “Use for data buffering” checkboxes appear on the
Slot dialog box.
2. Click the “Enable” checkbox.
3. If desired, check the “Use for data buffering” checkbox.
4. Click OK.
5. Click “apply changes.”
Configuring a Wireless LAN PCMCIA Card
An administrative user can use the PCMCIA Management screen under
Configure>Network in Expert mode to configure a Wireless LAN PCMCIA
card. When you select “Wireless LAN” from the pull-down menu, the dialog
box shown in the following figure appears.
Figure 6-78:PCMCIA Wireless LAN Card Configuration Dialog Box