User`s guide

Web Manager for OnSite Administrators 313
Configuration>Network>PCMCIA Management
b. Enter a number for the OnSite to use to call back the GSM phone.
6. To configure authentication using OTP passwords, check the
“Authentication One Time Password Required” checkbox.
Note: OTP authentication works only if an OnSite administrator has
performed the prerequisite configuration described in “One Time Password
Authentication on the OnSite” on page 18.
7. Click OK.
8. Click “apply changes.”
Configuring an Ethernet PCMCIA Card
An administrative user can use the PCMCIA Management screen under
Configure>Network in Expert mode to configure an Ethernet PCMCIA card.
When you select Ethernet from the pull-down menu, the dialog box shown in
the following figure appears.
Figure 6-76:Ethernet PCMCIA Card Configuration Dialog Box
T To Configure an Ethernet PCMCIA Card
[Expert]
Follow this procedure to configure either 10/100BaseT or Fibre PCMCIA
cards.
1. Install the Ethernet card and select “Ethernet” from the pull-down menu
on the PCMCIA Management screen.