User`s guide

Configuration>Network>PCMCIA Management
312
AlterPath OnSite Administrators and Users Guide
Figure 6-75:GSM PCMCIA Card Configuration Dialog Box—Call Back
T To Configure a GSM PCMCIA Card [Expert]
1. Install the GSM card and select “GSM” from the pull-down menu on the
PCMCIA Management screen.
See “To Begin Configuring a PCMCIA Card [Expert]” on page 306, if
needed.
The “Local IP,” “Remote IP,” and “Pin Number” fields and the “Call
Back” check box appear on the Slot dialog box.
2. Enter an IP address in the “Local IP” field, if desired.
By default, the IP address of the OnSite is used. Only change the IP
address if you have a specific reason to do so.
3. In the “Remote IP” field, specify the IP address to assign to the other end
of the PPP connection, if desired.
By default, the IP address 10.0.0.1 is assigned. Only change the IP
address if you have a specific reason to do so.
4. Enter a personal identification number known to the owner of the GSM
card in the “PIN Number” field.
5. To enable call back, do the following:
a. Check the “Call Back” check box.
The “Phone Number” field appears on the Slot dialog box.