User`s guide

Configuration>Network>PCMCIA Management
310
AlterPath OnSite Administrator’s and User’s Guide
Figure 6-73: ISDN PCMCIA Card Configuration Dialog Box—Call Back
T To Configure an ISDN PCMCIA Card [Expert]
1. Install the ISDN card and select “ISDN” from the pull-down menu on the
PCMCIA Management screen.
See “To Begin Configuring a PCMCIA Card [Expert]” on page 306, if
needed. The “Local IP” and “Remote IP” fields and the “Call Back”
check box appear on the Slot dialog box.
2. Enter an IP address in the “Local IP” field, if desired.
By default, the IP address of the OnSite is used. Only change the IP
address if you have a specific reason to do so.
3. In the “Remote IP” field, specify the IP address to assign to the other end
of the PPP connection, if desired.
By default, the IP address 10.0.0.1 is assigned. Only change the IP
address if you have a specific reason to do so.
4. To enable call back, do the following:
a. Check the “Call Back” check box.
The “Phone Number” field appears on the Slot dialog box.
b. Enter a number for the OnSite to use to call back the remote modem.
5. Click OK.