User`s guide

Web Manager for OnSite Administrators 309
Configuration>Network>PCMCIA Management
By default, the IP address 10.0.0.1 is assigned. Only change the IP
address if you have a specific reason to do so.
3. To enable call back, do the following:
a. Check the “Call Back” check box.
b. Enter a number to use to call back the modem.
4. To configure authentication using OTP passwords, check the
“Authentication One Time Password Required” checkbox.
Note: OTP authentication works only if an OnSite administrator has
performed the prerequisite configuration described in “One Time Password
Authentication on the OnSite” on page 18.
5. Click OK.
6. Click “apply changes.”
Configuring an ISDN PCMCIA Card
An administrative user can use the PCMCIA Management screen under
Configure>Network in Expert mode to enable users to connect to the OnSite
through an ISDN PCMCIA card. When you select ISDN from the pull-down
menu, the dialog box shown in the following figure appears.
Figure 6-72:ISDN PCMCIA Card Configuration Dialog Box
When the “Call Back” checkbox is checked, the Phone Number field appears
as shown in the following figure.