User`s guide

Configuration>Network>PCMCIA Management
306
AlterPath OnSite Administrator’s and User’s Guide
While configuring a PCMCIA card, you must inserted a card in one of the
PCMCIA slots on the front of the OnSite.
For configuring call back, you need to have the phone number of the remote
modem calling in.
T To Begin Configuring a PCMCIA Card
[Expert]
1. Insert a PCMCIA card into one of the slots on the front of the OnSite.
2. Go to Configuration>Network>PCMCIA Management in Expert mode.
The PCMCIA Management page appears.
3. Click the “Insert” button on the line for the slot in which you installed the
PCMCIA card.
The card type appears under the “Card Type” column.
4. Click the Configure button.
The “Slot” dialog box appears.
5. Select the desired PCMCIA card type to configure from the pull-down
menu.
6. Go to the appropriate procedure.
To Configure a Modem PCMCIA Card [Expert]
Page 308
To Configure an ISDN PCMCIA Card [Expert]
Page 310
To Configure a GSM PCMCIA Card [Expert]
Page 312
To Configure an Ethernet PCMCIA Card [Expert]
Page 313
To Configure a Compact Flash or Hard Disk PCMCIA Card [Expert]
Page 315
To Configure a Wireless LAN PCMCIA Card [Expert]
Page 316