User`s guide

Web Manager for OnSite Administrators 291
Configuration>Security>Users & Groups
Setting KVM Port Permissions
If a user or group name is selected from the list of users and groups and the
“Set KVM Permissions” button is clicked on the
Configuration>Security>Users & Groups screen, a “KVM Access List”
screen appears like the one in the following figure.
Figure 6-58:Users & Groups Configuration “KVM Access List” Screen
When the “Default Access List” checkbox is checked, the selected user or
group has the same permissions that are assigned to the Generic User.
If the checkbox is unchecked, KVM port access permissions can be
configured for a user or group to be different from the Generic User by doing
the following:
• Choosing a user-specific “Default Permission”
• Specifying explicit permissions for specific ports
If the “Default Access List” checkbox on the KVM Access List dialog box is
deselected, the “Default Permission” pull-down menu becomes active with
the options: “No access,” “Read only,” “Read/Write,” “Full access,” as shown
in the following figure.