User`s guide

Web Manager for OnSite Administrators 285
Configuration>Security>Authentication
T To Configure a NIS Authentication Server
[Expert]
Perform this procedure to identify the authentication server when the OnSite
or any of its ports is configured to use the NIS authentication method or any of
its variations (Local/NIS, NIS/Local, or NIS/DownLocal).
1. Go to Configuration>Authentication>NIS in Expert mode.
The NIS screen displays as shown in the following figure.
Figure 6-52:Web Manager NIS Authentication Server Screen
2. Fill in the screen according to your configuration of the NIS server.
3. Click “Done.”
4. Click “apply changes.”
T To Configure a RADIUS Authentication
Server [Expert]
Perform this procedure to identify the authentication server when the OnSite
or any of its ports is configured to use the RADIUS authentication method or
any of its variations (Local/RADIUS, RADIUS/Local, or RADIUS/
DownLocal).
1. Go to Configuration>Authentication>RADIUS in Expert mode.
The RADIUS screen displays as shown in the following figure.