User`s guide

Web Manager for OnSite Administrators 283
Configuration>Security>Authentication
Figure 6-50:Web Manager LDAP Authentication Server Screen
2. Supply the IP address of the LDAP server in the “LDAP Server” field.
3. If the LDAP authentication server uses a different distinguished name for
the search base than the one displayed in the “LDAP” Base field, change
the definition.
The default distinguished name is “dc,” as in dc=value,dc=value. If
the distinguished name on the LDAP server is “o,” then replace dc in the
base field with o, as in o=value,o=value.
4. Replace the default base name with the name of your LDAP domain.
For example, for the LDAP domain name cyclades.com, the correct entry
is: dc=cyclades,dc=com.
5. Click “Done.”
6. Click “apply changes.”
The changes are stored in /etc/ldap.conf on the OnSite.
T To Configure an SMB(NTLM) Authentication
Server [Expert]
Perform this procedure to configure an SMB(NTLM) authentication server if
any of the ports is configured to use the NTLM (Windows NT/2000/2003
Domain) authentication method or NTLM/Downlocal local fallback option.