User`s guide

Configuration>Security>Authentication
276
AlterPath OnSite Administrator’s and User’s Guide
Configuration>Security>Authentication
Selecting Configuration>Security>Authentication in Expert mode brings up
the seven tabs shown in the following figure.
Figure 6-47:Web Manager Authentication Tab Options
An administrative user can use the Authentication screens for the two
following related tasks:
• Select a method for authenticating logins to the OnSite only.
See “Configuring Authentication for OnSite Logins” on page 277.
• Identify all authentication servers for authentication during logins to the
OnSite or to ports
See “Configuring Authentication Servers” on page 278.
For selecting an authentication method for logins to devices connected to
KVM and serial ports, the screens are under Configuration>KVM and
Configuration>Serial. See the following sections, if desired, for how to select
an authentication method for ports:
See “Authentication” on page 26 of Chapter 1 for an overview of
authentication on the OnSite, if needed.
To Configure an Authentication Method for Direct Access
to KVM Ports [Expert]
Page 217
To Configure a Serial Port Authentication Method [Expert] Page 241