User`s guide

Web Manager for OnSite Administrators 273
Configuration>Inband
The choices are “Cold Start,” “Warm Start,” “Link Down,” “Link up,”
“Authentication Failure,” “EGP neighbor loss,” or “Enterprise specific.”
5. Enter a community in the “Community” field.
6. Enter the IP address or name of a SNMP Server.
7. Enter a message in the “Body” text area.
8. Click “OK.”
Configuration>Inband
Selecting Configuration>Inband in Expert mode brings up a screen like the
one shown in the following figure.
Figure 6-44:Web Manager Configuration>Inband Screen
Administrative users can use the Inband screen to configure one of the
following two types of access to Windows servers that have RDP enabled:
• Inband-only access to servers that are not connected to KVM ports
• AdaptiveKVM access to servers that are connected to KVM ports (inband
access is provided as long as the server is fully operational and accepting
RDP requests, with automatic fallback to KVM over IP access if inband
access fails)
See “Inband” on page 43 for more details about the technology.