User`s guide

Configuration>Serial/AUX>Notifications
272
AlterPath OnSite Administrators and Users Guide
T To Configure a Trigger for Pager Notification
for Serial Ports
[Expert]
1. Go to Configuration>Serial/AUX>Notifications in Expert mode, select
Pager from the pull-down menu; optionally, configure an alarm to sound
when the trigger action occurs; and choose “Pager” from the pull-down
menu, and click either Add or Edit.
If needed, see “To Choose a Method for Sending Notifications for Serial
Port Data Buffering [Expert]” on page 217.
The “Notifications Entry” dialog box appears.
2. Specify the function you want to trigger a notification in the “Alarm
Trigger” field using the required syntax.
3. Select “Pager” from the pull-down menu.
4. Enter the pager number in the “Pager Number” field.
5. Enter the text that describes the event in the “Text” field.
6. Enter the Short Message Services (SMS) user name, the SMS servers IP
address or name, and the SMS port number in the “SMS User Name,”
“SMS Server,” and “SMS Port” fields.
7. Click “OK.”
T To Configure a Trigger for SNMP Trap
Notification for Serial Ports
Expert]
1. Go to Configuration>Serial/AUX>Notifications in Expert mode, select
“SNMP Trap” from the pull-down menu; optionally, configure an alarm
to sound when the trigger action occurs; and click either Add or Edit.
If needed, see “To Choose a Method for Sending Notifications for Serial
Port Data Buffering [Expert]” on page 217.
2. Specify the function you want to trigger a notification in the “Alarm
Trigger” field using the required syntax.
3. Enter the number in the “OID Type Value” field.
4. Configure the appropriate trap number from the “Trap Number” pull-
down menu.