User`s guide

Web Manager for OnSite Administrators 259
Configuration>Serial/AUX>Aux/Modem Port
PPP and the AUX and Modem Ports
When configuring PPP connections to an external modem connected to an
AUX port or to the modem port, an administrative user can use the AuxPort1
or AuxPort2 or ModemPort screens to change the default settings, if desired.
The settings are shown in the following screen examples and in Table 6-19,
“Fields for Configuring PPP on AuxPort or ModemPort Screens,” on page
261.
When you go to the screens for either AuxPort1 or AuxPort2 under
Configuration>Aux/Modem Port in Expert mode, the screen in the following
figure appears if “PPP” is selected on the “Profile” pull-down menu.
Figure 6-40:Web Manager Configuration>Serial/AUX>Aux/
Modem>AuxPort1 and AuxPort2—PPP
When you go to Configuration>Serial/AUX>Aux/Modem Port>ModemPort
in Expert mode, the screen shown in the following figure appears.