User`s guide
Configuration>Serial/AUX>Aux/Modem Port
258
AlterPath OnSite Administrator’s and User’s Guide
• AUX port 2 can be used for power management while connected only
for devices connected to a serial port
.
The following table shows the power management options for the two AUX
ports.
When either the AuxPort1 or AuxPort2 tabs are selected under
Configuration>Serial/AUX>Aux/Modem Port in Expert mode, the screen
shown in the following figure appears, if “Power Management” is selected on
the “Profile” pull-down menu.
Figure 6-39:Web Manager Configuration>Serial/AUX>Aux/Modem
Port>AuxPort1 and AuxPort2—Power Management
Table 6-18: Power Management Options for AUX Ports
Port Power Management Options Types of devices
AUX 1
From the Web Manager Access>IPDU
Power Management menu
Any server or other device connected to
either a KVM or a serial port
While connected to a serial or KVM port
through the Web Manager or directly to a
serial port through a console session.
Any server or other device connected to
either a serial or KVM port
AUX 2
From the Web Manager Access>IPDU
Power Management menu
Any server or other device connected to
either a KVM or a serial port
While connected to a serial port through the
Web Manager or through a console session.
Any server or other device connected to a
serial port