User`s guide

Configuration>Serial/AUX>Physical Ports>Other
256
AlterPath OnSite Administrator’s and User’s Guide
When one of the dumb terminal connection protocols are selected three
tabs are greyed out of the six Serial/AUX>Physical Ports>[Select a serial
port] tabs.
2. Select the “Other” tab.
The Other screen appears.
3. To change the port number used to access the serial port, enter another
number in the “TCP Port” field.
4. To change the keep-alive interval, enter another number in the “TCP
Keep-alive Interval” field.
5. To change the idle timeout interval, enter another value in the “Idle
Timeout” field.
6. Specify stty options, if desired, in the “STTY Options” field.
7. To change the break interval, enter a new number in the “Break Interval”
field.
8. To change the break sequence, enter a new sequence in the “Break
Sequence” field.
9. To change the content of the login banner, enter new content in the “Login
Banner” field.
10. For a dedicated dumb terminal, enter the IP address of the desired host in
the “Host to Connect” field.
11. Enter the type of terminal in the “Terminal Type” field.
12. Click “Done.”
13. Click “apply changes.”