User`s guide

Web Manager for OnSite Administrators 255
Configuration>Serial/AUX>Physical Ports>Other
2. Select the “Other” tab.
The Other screen appears.
3. To change the port number for the serial port, enter another number in the
“TCP Port” field.
4. To assign a name to the port’s IP address, enter an alias in the “Port IP
Alias” field. For example, if the serial port is connected to a CISCO
router, you could assign it a name like “cisco_router1.”
5. If connecting to a server running the Microsoft Windows Server 2003
operating system through the emergency management services (EMS)
console, check the “Windows EMS” checkbox.
6. To change the keep-alive interval, enter another number in the “TCP
Keep-alive Interval” field.
7. To change the idle timeout interval, enter another value in the “Idle
Timeout” field.
8. Specify stty options, if desired, in the “STTY Options” field.
9. To change the break interval, enter a new number in the “Break Interval”
field.
10. To change the break sequence, enter a new sequence in the “Break
Sequence” field.
11. To change the content of the login banner, enter new content in the “Login
Banner” field.
12. Click “Done.”
13. Click “apply changes.”
T To Configure Dumb Terminal Server
Connection Options
[Expert]
Do this procedure if you have connected a dumb terminal to a serial port.
1. Select the port and choose an appropriate connection protocol from the
General screen.
See Table 6-13, “Protocols for Dumb Terminals Connected to Serial
Ports,” on page 233 and “To Configure a Serial Port Connection Protocol
for a Console Connection [Expert]” on page 236).