User`s guide

Web Manager for OnSite Administrators 253
Configuration>Serial/AUX>Physical Ports>Other
Configuration>Serial/AUX>Physical Ports>Other
Selecting Configuration>Serial/AUX>Physical Ports in Expert Mode,
selecting one or more serial ports, and then selecting the Other tab, brings up a
screen like the one shown in the following figure.
Figure 6-36:Web Manager Configuration>Serial/AUX>Physical Ports>
Other Screen
An administrative user can use this screen to configure a non-default TCP
port, a port IP alias, TCP keep-alive interval, idle timeout, stty options, break
interval, break sequence, and login banner for a serial port. An administrative
user can also configure a remote host for a dumb terminal to access and the
terminal types for a connected dumb terminal.
Note: Some Sun servers are designed to switch to monitor mode when they
receive a break signal on the console port, which allows the system
administrator to reset, reboot, or reconfigure the server in the case of a system
lockup. To reduce the risk of false breaks bringing down that kind of server,
an administrative user can define the break signal as a sequence of ASCII
characters that are not likely to be accidentally generated.