User`s guide

Configuration>Serial/AUX>Physical Ports>Power Management
252
AlterPath OnSite Administrator’s and User’s Guide
6. Click “apply changes.”
T To Configure a User for IPDU Power
Management for a Serial Port [Expert]
Perform this procedure to authorize a user to perform power management for
a device that is connected to one of the OnSite’s serial ports. The device must
be plugged into one or more outlets on an AlterPath PM IPDU that is
connected to one of the AUX ports, and the AUX port must be configured for
power management. A user configured for IPDU power management for a
serial port can manage power for the device connected to the serial port in the
two following ways:
• While connected to the device through the serial port(s)
• Through the Web Manager’s “IPDU Multi-Outlet Ctrl.” screen
1. Configure the serial port for IPDU power management as described in
Step 1. through Step 3. under “To Configure a Serial Port for IPDU or
IPMI Power Management [Expert]” on page 208, but do not click the
“Done” button.
2. To allow everyone with access permissions for this port to perform power
management on this port, click the “Allow All Users” radio button.
3. To restrict power management on this port to a restricted list of users
authorized to access this port, click the “Allow Users/Groups.”
4. Enter a valid username or groupname in the “New User/Group” field, and
click “Add.”
5. Click “Done.”
6. Click “apply changes.”