User`s guide

Web Manager for OnSite Administrators 247
Configuration>Serial/AUX>Physical Ports>Power Management
Configuration>Serial/AUX>Physical
Ports>Power Management
Selecting Configuration>Serial/AUX>Physical Ports in Expert Mode,
selecting one or more serial ports, and then selecting the Power Management
tab, brings up a screen like the one shown in the following figure.
Figure 6-32:Web Manager Configuration>Serial/AUX>Physical
Ports>Power Management Screen
The administrative user can use this screen to authorize one or more users to
perform either IPDU or IPMI power management on a device that is
connected to the selected serial port. While connected to the device, an
authorized user can enter a hot key to bring up a menu or a dialog box to
perform IPDU or IPMI power managment. While logged into the Web
Manager, the authorized user can perform IPDU power management through
the “IPDU Multi-Outlet Ctrl” screen.
Note: “Enable power management” on this screen refers to IPDU power
management.
Configuring either IPDU or IPMI power management requires you to specify
a hot key. The default for IPDU power management is Ctrl+p. The default
for IPMI power management is Ctrl+Shift+i.