User`s guide

Web Manager for OnSite Administrators 245
Configuration>Serial/AUX>Physical Ports>Multi User
7. Click “apply changes.”
To configure alarm notifications to be sent based on the type of buffered data,
see “To Choose a Method for Sending Notifications for Serial Port
Data Buffering Events [Expert]” on page 270.
Configuration>Serial/AUX>Physical Ports>Multi
User
Selecting Configuration>Serial/AUX>Physical Ports in Expert Mode,
selecting one or more serial ports, and then selecting the Multi User tab brings
up a screen like the one shown in the following figure.
Figure 6-31:Web Manager Configuration>Serial/AUX>Physical
Ports>Multi User Screen
The administrative user can use this screen to allow multiple users to connect
to a serial port at the same time and allow or disallow port sharing
(simultaneous access to the same port). To connect to the port or start a shared
session at the port, the user must have permission to access the port.
The following table describes the options from the “Allow Multiple Sessions”
pull-down menu.
Table 6-17: Options on the “Allow Multiple Sessions” Menu
Menu Option Description
No Only one shared session and one normal session are
allowed. The shared session menu is presented.