User`s guide

Web Manager for OnSite Administrators 243
Configuration>Serial/AUX>Physical Ports>Data Buffering
Figure 6-30:Web Manager Serial/AUX>Physical Ports>Data Buffering
Fields and Menu Options
T To Configure Data Buffering for Serial Ports
[Expert]
To configure data buffer files to be stored remotely, make sure that a system
administrator has already configured an NFS server and shared the mount
point. Obtain the facility number for the OnSite from the system administrator
of the syslog server. Options range from Local10 to Local17. See
“Notifications, Alarms, and Data Buffering” on page 40 for how the facility
number is used, if needed.
1. Go to Configuration>Serial/AUX>Physical Ports in Expert mode, and
select a port or ports to modify.
If needed, see “To Select One or More Serial Ports [Expert]” on page 193.
Six tabs appear.
2. Select the Data Buffering tab.
The Data Buffering screen displays.
3. Check either or both of the checkboxes.
4. If you selected “Enable Data Buffering,” perform the following steps.