User`s guide

Web Manager for OnSite Administrators 241
Configuration>Serial/AUX>Physical Ports> Access
The Access screen appears.
3. To restrict access to one or more users or to a group of users, enter
previously defined user or group names in the “Authorized Users/Groups”
field, with the names separated by commas.
4. To deny access to one or more users or groups, preface the user or group
names with an exclamation point (!).
5. Click “Done.”
6. Click “apply changes.”
T To Configure a Serial Port Authentication
Method [Expert]
This procedure configures an authentication method that applies to logins to
serial ports. Different methods can be selected for individual ports or for
groups of ports.
1. Go to Configuration>Serial/AUX>Physical Ports in Expert mode, and
select a port or ports to modify.
If needed, see “To Select One or More Serial Ports [Expert]” on page 193.
Six tabs appear.
2. Click the Access tab.
3. To select an authentication method, select one of the options in the Type
menu.
4. Click “Done.”
5. Click “apply changes.”
The changes are stored in /etc/portslave/pslave.conf on the
OnSite.
6. Make sure that an authentication server is specified for the selected
authentication type.
See “Tasks for Setting up Authentication Servers
for Each Authentication Method” on page 278 for links to the procedures
that apply to each authentication method.